Alexander
A.Shpilman (alexandrshpilman78@gmail.com )
The Generator of the "Axion
Field " Sort 5
(continuation, beginning in N3/00)
The designs of generators can be
improved indefinitely. In this endless process the moments of occurrence of new
quality are most interesting.
In a ferrite pipe 9 (see
Fig. 1) the optimum conditions for the "axion
field" of sort 4 are created (see Ring structures of the "axion fields"). But the "axion
field" of sort 3 is present at the pipe 9 because there is a strong
interaction between pseudo-negative and pseudo-positive charges, and the
pseudo-positive charges of a proton are dominant. Thus, the difference of
electrical potential between electrodes 5 and 6 is not always enough for
splitting the "axion field" of sort 3.
|
|
|
|
Fig.1 |
Fig.2 |
The "axion field" of sort 3 tends to concentrate in a
clearance between ferrite pipe 9 and magnet 1. Therefore for splitting the
"axion field" of sort 3 on a method described
in "Separation Axion
(Spin) Field",
the electrical "capacitor" of a special design is entered in this
clearance.
"Capacitor" consists of metal pipe 12, on which surface the strips of
dielectric polyethylene terephthalate of film 11 with the aluminium
metallized coat 10 are glue, as it is shown in a Fig. 2.
Repeated passages of the
way: the metal pipe 12 - dielectric film 11 - aluminium
metallized coat 10 (with positive electrical potential) - air - metal pipe 12
results to splitting of the "axion field"
of sort 3 and formation of the field of sort 4 similarly to shown on a
Fig.3-Fig.5 in "Separation Axion
(Spin) Field".
In the result there is an
increase of density of a beam of the "axion
field" of sort 5 on an output of the generator.
The additional increasing of density of the field is made by compression of the
beam, using a combination of the cone-shaped toroidal
electrical coil 8 with the lengthened central conductor connecting cones 4 and
tube (or set of several silver conductors) 13.
The generated field is
"rigid" with the large longitudinal pulse and it is very dangerous
for a man. Therefore do not put a hand and a head (if it not empty) in the
beam.
Translation of M.Dvoretskaya
