Alexander A.Shpilman ( alexandrshpilman78@gmail.com )
The generator of "axion fields" - "COMFORT-9"
Generator COMFORT-9 outwardly does not differ
from the generator generator COMFORT-8 (see the Photo).
|
|
In a
design the "Converter" 18 (Fig.1 see) in reeled up by the
braided plait of a copper wire in varnish isolation in the form of "camomile" as is shown in Photo.2 is added. On it the
photo is clearly visible "camomile" but also it is visible sparseness
windings. More dense packing turns out at "camomile" winding by a
double plait as a very narrow tape, putting its edge in intervals between
"camomile" petals (Photo.3 see).
|
|
|
|
|
Fig.1 |
|
|
|
|
Photo.2 |
Photo.3 |
Accordingly
at "Converter" use necessity for facing E on a
reflector 3 (Fig.1 in "COMFORT-М5" see) disappears. In generator COMFORT-9L
"converter" with left twisting a plait, and
in COMFORT -9R from the right is used. Voltage between
conductors of an order of 330V. The counter current in plait conductors is
set approximately 100 mA, and adjustment of
a relation of currents is set necessary quality DSS clusters generated. For "heating" of the last
(increase in internal energy) the current of one shoulder of the converter is
modulated with frequency of 4.3 MHz.
Unlike COMFORT-8
beam COMFORT-9 creates more refined sensations. Qualitatively works on more
"thin levels".
|
|
You can buy the generator of the
described design Attention, this generator is not a
magic wand! Its main destination - to carry
out of researches. (Information on E-mail: alexandrshpilman78@gmail.com ) |
