|
|
You can buy the generator. |
Alexander
A.Shpilman (alexandrshpilman78@gmail.com )
The Generator of "Axion (Spin) Field"
- "COMFORT-M"
(continuation, beginning in N5/99)
If
a ferrite ring 2 (see Fig. 1) was processed in "M-state" Elements
Concentrators"
so for increasing of efficiency of "axion field" generation it makes
sense to feed on a reflector 3 the negative voltage of 80-100 volts (add a
high-frequency voltage). Thus, for stabilization of a beam of the "axion
field" it is necessarily to add to the reflector a grid 10 (wire grid from
silver) electrical connected with the reflector 3.
|
|
In
the cylindrical electrical coil 4 direction of a current varies on an opposite
direction so, that, there will be "South Pole" above and
"Northern Pole" below.
The
further increasing of efficiency of generation of "axion field" is
achieved by increasing of value of vector potential because of increasing of
the square of cross section of iron cores 5 and 8. Thus, variable on the radius
the section of the core 8 becomes insufficient. Therefore the core 8 and
toroidal electrical coil 9 are replaced with a compound design made from two
enclosed iron rings cores with the appropriate toroidal electrical coils (see
Fig.1), that is similar with a design in "The
optical generator Axion (Spin) of a field".
