Alexander
A.Shpilman ( alexandrshpilman78@gmail.com )
The Generator of a "Place Power" GPP-3
New the condenser type the generator of DSS
elements GPP-3 is shown on a photo.
|
The
design consists of two ceramic saucers 1,2 of the burnt clay (see Fig.1).
Fig.1 |
Strips of electrodes 3,4 are put on saucers
3,4. On an electrode 4 pulsing voltage +20-25 kV is fed. On an
electrode 3 pulsing voltage -20-25 kV is fed.
Between bottoms of saucers the backlash about 5
mm is installed. Basically, it is possible to close an electric conductor
(metal fastening) the central areas of saucers, but thus quality generated DSS
elements a little will change
In distinguish from condenser a
variant of the generator described in " The
High-Voltage Generator of DS-state Elements", the ceramics of the
burnt clay has been chosen because of small it electroconductivity for high
voltage. That gives following advantages:
1) The charges
injected in dielectric quickly resolves. (Which reduce amplitude of a
pulsation of a field in thickness dielectric ).
2) In difference from
metal conductors, in "semiconductor" speed electrons much more above.
Their movement can give additional power rating DSS of elements.
GPP-3 ionizes
air, but not so intensively as generators of type IPP, on that the finding of
people in one room with working device is not so critical. Besides the
generator does not demand adjustments.
You can buy the imitator of a "place
power" GPP-3 Information on E-mail: alexandrshpilman78@gmail.com |